Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

[piselloa]

I have a BL460c G7 that I am trying to repurpose as a test server. I have deployed Windows Server 2012 R2 and pushed the HP SPP 2015.10 but the NICs still will not show up in network connections. 

Is there a seperate Emulex driver that anyone knows of that I can install to resolve this issue?

I am getting the following error code:

"This device cannot start. (Code 10)

{Operation Failed}

The requested operation was unsuccessful"

Server: HP BL460c G7

HP SPP version: 2015.10

OS: Windows Server 2012 R2

NIC: HP NC553i Dual Port FLexFabric 10Gb Converged Network Adapter

Driver Version: 10.5.121.7

Thanks,

Tony

[gavrilenkov]

This is a problem with drivers from HP in the last SPP

When you restart the blade - network adapters do not rise - X ?

We must look for a boot image from the driver Emuleks. Upload, flashing adapter. 

I solved his problem in such a way

[ixwesley]

Have same problem.

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=4194639&swLangOid=8&swEnvOid=54

Download Legacy_OneConnect-Flash-10.5.160.0.ISO boot& upgrade FW. Reboot

Problem Solved

[Sal1975]

Thanks for your help.

This was the same problem I had, once running the Emulex firmware patch, at all came good again.

Some of the sympthoms I saw was during POST the Emulex BIOS looping:

And in "device manager" you had the "yellow bang" icon on all network related items.

This was when moving a HP Blade 460c to a new enlocsure that was under HP Oneview. Something did not seem to go right when it assigned the profile to the slot.