BladeSystem Server Blades

Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

 
piselloa
Occasional Contributor

Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

I have a BL460c G7 that I am trying to repurpose as a test server. I have deployed Windows Server 2012 R2 and pushed the HP SPP 2015.10 but the NICs still will not show up in network connections. 

Is there a seperate Emulex driver that anyone knows of that I can install to resolve this issue?

I am getting the following error code:

"This device cannot start. (Code 10)

{Operation Failed}

The requested operation was unsuccessful"

 

Server: HP BL460c G7

HP SPP version: 2015.10

OS: Windows Server 2012 R2

NIC: HP NC553i Dual Port FLexFabric 10Gb Converged Network Adapter

Driver Version: 10.5.121.7

 

 

Thanks,

Tony

3 REPLIES 3
gavrilenkov
Advisor

Re: Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

This is a problem with drivers from HP in the last SPP

When you restart the blade - network adapters do not rise - X ?

We must look for a boot image from the driver Emuleks. Upload, flashing adapter. 

I solved his problem in such a way

 

ixwesley
New Member

Re: Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

Have same problem.

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=4194639&swLangOid=8&swEnvOid=54

Download Legacy_OneConnect-Flash-10.5.160.0.ISO boot& upgrade FW. Reboot

Problem Solved

Sal1975
Occasional Visitor

Re: Windows Server 2012 and HP NC553i Dual Port Flex Fabric 10Gb not working

Thanks for your help.

This was the same problem I had, once running the Emulex firmware patch, at all came good again.

Some of the sympthoms I saw was during POST the Emulex BIOS looping:

And in "device manager" you had the "yellow bang" icon on all network related items.

This was when moving a HP Blade 460c to a new enlocsure that was under HP Oneview. Something did not seem to go right when it assigned the profile to the slot.