BladeSystem - General
1747980 Members
4075 Online
108756 Solutions
New Discussion

firmware Integrity BL860c i4

 
UnixTeamIta
Occasional Visitor

firmware Integrity BL860c i4

I need to do a firmware update on an iTanium HP-UX 11.31 blade

Integrity BL860c i4

My FW revisions are

iLO FW : 01.70.01
System FW : 02.63
MHW FPGA : 02.02
Power Mon FW : 03.04
Front Panel HW : 05.00
PRS HW : 02.08
IOH HW : 02.02

and that should mean early 2016, I'd like to update to late 2016.

I looked around and found downloads and instructions for Windows or Linux systems: how can I do a FW update on a good old HP-UX system?

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: firmware Integrity BL860c i4

Latest bundle is

47.00(17 Nov 2016)

 

containing

Bundle Version: 47.00
System Firmware Version: 02.64
FPGA Firmware Version: 02.02
iLO-3 Firmware Version: 01.71.06
Power Monitor Firmware Version: 03.04
Front Panel HW: 04.00 or 05.00
PRS HW: 02.08
IOH HW: 02.02

 

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5330438&swItemId=MTX_83bf2500cfc742408247b17d94&swEnvOid=4001#tab4

 

 

The bundle containing HPSUM as update tool. There is a version for linux and for windows, this means you take your PC and run the bundle. Then you point HPSUM to your blade and enclosure.

This is the reason why you find downloads for linux and windows.

 

Please read the instructions:

https://downloads.hpe.com/pub/softlib2/software1/doc/p1061226980/v124166/bl8x0_i4_47_00.htm


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!