Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

not able to access ILO from website

Go to solution
Occasional Advisor

not able to access ILO from website

I have HP blade server c7000 enclosure. I was accessing ILO from last 3 years. But from last few days I am not access the same.

I am trying to ping the IP but I am getting request time out. ILO port is blinking, I reconnect it but still the same issue.

Please help me to sort out the issue.


Vaibhav Chavan


Honored Contributor

Re: not able to access ILO from website

Do you mean the enclosure OA?  Try performing an OA reset.  You can do this by the small button on the OA module.  If you have two OA's installed, be sure to reset the active one (active LED will be lit).



Was this helpful? Like this post by giving me a thumbs up below!
Occasional Advisor

Re: not able to access ILO from website

Yes.. Thanks a lot. It ie working after resetting OA.