SB40C - how to configure?

[AndyStewart999]

Yes, fair call but i"m getting a bit frustrated!

Re positioning, yes they are in the right order relationship-wise.  Blade in #1, storage in #2 for example.

Yes, there's an array controller in there.  Having taken the top off I see the PCI-E card with two molex SAS cables going to the backplane.  If I remove the controller and plug the SB40C in, the chassis doesn't like it.

In all scenarios, the chassis sees the two blades (BL460c and storage) as paired up OK.

[AndyStewart999]

Thanks Vijay - as this is all super-old kit bought on eBay, am I still going to be able to raise a support ticket against it as I don't have a support contract.