HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

4 1/10 VC Modeules C7000 Encolsure

 
Duhaas_2
Occasional Advisor

4 1/10 VC Modeules C7000 Encolsure

I have four virtual connects in slots 0-3, and am wondering where I can find good documentation on how to daisy chain them. I have the cables I need, just dont understand which ones should connect to which, I found this: http://www.zdnetasia.com/2007/i/pwc/hp_intel/s7/technology-brief.pdf But its example has all 8 populated and dont see anything between 0 and 2 like I assume I should???
2 REPLIES
cjheimantx
Occasional Advisor

4 1/10 VC Modeules C7000 Encolsure

Quick specs for the modules show a stacking config for modules populated in bays 1-4 (slots 0-3). http://h18000.www1.hp.com/products/quickspecs/12597_na/12597_na.html The cookbook will cover it also. http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01471917/c01471917.pdf [Updated on 11/25/2009 10:56 AM]
Duhaas_2
Occasional Advisor

4 1/10 VC Modeules C7000 Encolsure

PERFECT, GOOD STUFF