BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

4HBA in BL460c Gen8 with FlexFabric

jdixon
Advisor

4HBA in BL460c Gen8 with FlexFabric

Is it possible to achieve up to 4-HBA in a BL460c Gen8 with FlexFabric? The 554FLB provides two ports but I'm looking at wanting an additional 2 ports. If I add another 554FLB card will it use the FlexFabric modules in the BAY 1 & 2 or will I have to add additional FlexFabric modules to Bay 3 & 4?

2 REPLIES
RR33
HPE Pro

Re: 4HBA in BL460c Gen8 with FlexFabric

You will have to add modules in bay3 and 4

I´m a volunteer in the HPE Forum.
If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The opinions expressed are the personal opinions of the authors, not of Hewlett Packard Enterprise.
bzinck
HPE Pro

Re: 4HBA in BL460c Gen8 with FlexFabric

Mez 1 goes to ICM bays 3 /4  ,  Mez 2 goes to ICM 5 /6  so you will need another set of ICM's

 

I am an HPE Employee