BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Administratively Hidden LOM1:1-d, LOM2:1-d

 
heldstma
Occasional Visitor

Administratively Hidden LOM1:1-d, LOM2:1-d

I am trying to get 4 FlexNic ports per FlexFabric module and the 4th port is showing up as "Administratively Hidden".  I am not using any of the first 3 for storage.  This is a brand new Gen9 blade with FF 20Gb 2-port 630FLB Adapters.

 

LOM1:1-d FLB1 Bay 1:d5:v4 HP FlexFabric 20Gb 2-port 630FLB Adapter

 

Any thoughts?  This is the first time I have used the 630FLB's, as the rest of my blades are Gen8's with 10Gb adapters.

 

...of course the same goes for the other FF module.

1 REPLY
Amr_Hossam
Occasional Contributor

Re: Administratively Hidden LOM1:1-d, LOM2:1-d

there is an option setting you nee to clear when yo u are creating the vc profile .uncheck that option

hope it solvs your issue