BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c not booting with Virtual Connect

BL460c not booting with Virtual Connect

Hi, I have a customer that is working with support on this issue, thought someone might have some ideas as well. VC-Eth installed in Bays 1 and 2, (VC-FC in Bays 3 and 4) BL460c with QLogic in Mezz 1, NC326m in Mezz 2. He has no VC-Eth in bays 5 and 6, wants to fill these later. Here is the strange part: If he tried to boot it hangs at POST (Right after Smart Array init). If he removes the NC326m it boots fine (All 3 of the blades in that enclosure). I had him move Bay 2 VC-Eth to Bay 5. He did this and kept the NC326m in the mezz 2, still no boot. VC, iLO, OA, BIOS all up to date. Any thoughts on this one? Does not seem to be VC-Eth placement...I have never seen this symptom before... Thank you for any thoughts! Shawn
3 REPLIES

BL460c not booting with Virtual Connect

What version of VC is this? 2.01?

BL460c not booting with Virtual Connect

Latest, 2.01 yes.

BL460c not booting with Virtual Connect

Solved this with customer, he did not have VC Server Profiles created. Once we did that and assigned to Bay the servers booted. S