BladeSystem Virtual Connect
Showing results for 
Search instead for 
Did you mean: 

Bl860C virtual connect and HP-UX v3

Super Advisor

Bl860C virtual connect and HP-UX v3


A customer have an Enclosure of C7000 and two BL860C , he want a HPUX cluster (HP-UX v3) .

He want six nics from the virtual connect (LOM), all this nics must be into the same Vlan (60).

How I can do to assign this nics if each network created from Virtual connect only permit assign two LOM by network.


Some idea in virtual connect configuration?

Steven Clementi
Honored Contributor

Re: Bl860C virtual connect and HP-UX v3

Not sure if I fully understand the question.  Can you post a screenshot of the current configuration?


If you mean to say that you can only assign a particular network to only 1 vNic on LoMA or on LoMB... then yes... you may need to adjust your Network Profiles.



Depending upon your uplinks, you may need to create multiple network profiles.

Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
NPP3 (Nutanix Platform Professional)