BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade C7000 VC flexfabric 10gb 24port Bay 1,2,3,4 + HP Ethernet 1Gb 4-port 366M( mezzanie 1) ?

Plz
Occasional Contributor

Blade C7000 VC flexfabric 10gb 24port Bay 1,2,3,4 + HP Ethernet 1Gb 4-port 366M( mezzanie 1) ?

Our company using C7000 blade with four VC flexfabric 10gb 24port (bay 1,2,3,,4) .

 

          Add a network card on the server blade (mezzanine card), I'd like to use. ( To use VC bay 3,4)

 

 

          

          HP BL460c G7 +HP NC325m PCI Express Quad Port Gigabit Server Adapter ( 416585-B21)

          HP BL460c Gen8 +   HP Ethernet 1Gb 4-port 366M Adapter  (615729-B21)

 

          How well above the network card is connected to a VC flexfabric 10gb 24port ? (bay 3,4 )

 

           Please wait  your answer.

 

 

 

        

3 REPLIES
msh_it
Frequent Advisor

Re: Blade C7000 VC flexfabric 10gb 24port Bay 1,2,3,4 + HP Ethernet 1Gb 4-port 366M( mezzanie 1) ?

Hi

 

you will need to install these cards in Mezz1 on each server, however only 2 ports will be usable and will be connected to bay 3-4. then you can configure it through VCM

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!
Plz
Occasional Contributor

Re: Blade C7000 VC flexfabric 10gb 24port Bay 1,2,3,4 + HP Ethernet 1Gb 4-port 366M( mezzanie 1) ?

Thank you very much.

 

Can I use port 5,6,7,8  on Flexfabric 10gb/24port ?

 

wait your answer...

msh_it
Frequent Advisor

Re: Blade C7000 VC flexfabric 10gb 24port Bay 1,2,3,4 + HP Ethernet 1Gb 4-port 366M( mezzanie 1) ?

You mean on the enclosure level?

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!