HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Both HBA WWN's(C7000) on Brocade Fabric using Virtual Connect

 
Buzz59
Occasional Visitor

Both HBA WWN's(C7000) on Brocade Fabric using Virtual Connect

We are seeing both HBA's on the same Fabric(SAN-A) for some servers and both WWN's for the other server's on SAN-B. Can someone tell us what is setup incorrectly? Thanks for any help.

1 REPLY
LouisH
Valued Contributor

Re: Both HBA WWN's(C7000) on Brocade Fabric using Virtual Connect

well without knowing exactly what type of SAN Interconnect you have installed in the Interconnect bays, I would first check Fiber from Bay 3 and Bay 4 to make sure one HBA port is indeed connecting to Fabric A and the second to Fabric B. Virtual Connect doesn't have anything to do with it, UNLESS you are using Virtual Connect 4Gb or 8Gb interconnect modules.

 

It is easy to cross fiber when connecting to SAN switches where both Fabrics are in the same rack.

 

What type of SAN fabric Interconnects are you using?

 

Regards,

 

Louis