BladeSystem - General
1748000 Members
5034 Online
108757 Solutions
New Discussion

Re: Connecting 10GBps Flex-10 VC to HP Procurve switches

 
JorisK
Regular Advisor

Connecting 10GBps Flex-10 VC to HP Procurve switches

Hi all,

 

We would like to connect our c7000 Blade system loaded with Flex-10 VC to a Procurve Switch with 10GBps bandwith.

 

My question is simple: is the following configuration going to work?

 

- One Blade c7000 enclosure

- One Procurve 2910-48G

- Transceiver 443756-B21 in the Flex-10 module

- Transceiver  J9150A in the Procurve

 

Connect both switches using LC Fiber cables.

 

Is this going to work? :)

 

1 REPLY 1
chuckk281
Trusted Contributor

Re: Connecting 10GBps Flex-10 VC to HP Procurve switches

P/N 443756-B21 is an XFP type of transceiver and will not work in the VC Flex-10 module. It only accept SFP or SFP+ types of transceivers.

 

webpic98.gif                               webpic99.gif

 

10Gb SR XFP                                     10Gb SR SFP+                              
443756-B21                                       455883-B21

Available only for port X2 and X3     VC Flex-10 module

on the VC 1/10GbE module