HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Disable iSCSI function on a FlexibleLOM 554FLB adapter

 
chuckk281
Trusted Contributor

Disable iSCSI function on a FlexibleLOM 554FLB adapter

Remco was looking for help:

 

****************

 

I hope that you are able to help me with this question regarding the 554FLB in the BL460c Gen8 connected to a Cisco 3120X

 The issue with the 554FLB is that you see an Ethernet function and an iSCSI function. This uses two MAC addresses instead of one (only Ethernet) and extra memory on the switches. The customer is only using the Ethernet function and wants to disable the iSCSI function.

  

·         Is there a way to disable the iSCSI function on the 554FLB? So that we only keep the Ethernet function.

 

Many thanks in advanced!

 

****************

 

Input from Dan:

 

*****************

 

CTRL-E during boot when prompted.

 

Or there are OS based Emulex tools called One Command Manager.

 

**************

 

Comments or questions?