Display 'multiple networks' on VC CLI show profile

[SeanDWA]

In the "Ethernet Network Connections" section of a 'show profile <profile name>' command shows just "multiple networks".  We haven't updated the VC to not require flash yet, so I cannot login to the web ui.  So from the CLI how do I get a breakdown of "multiple networks"?

e.g.

Ethernet Network Connections
=========================================================================
Port Network Status PXE/IP Boot MAC Address Allocated
Name Order Speed
(min-max)
=========================================================================
1 Multiple OK Enabled/Auto <mac removed> 10Gb-10Gb
Network
-------------------------------------------------------------------------
2 Multiple OK Disabled/Aut  <mac removed> 10Gb-10Gb
Network o
-------------------------------------------------------------------------

Thanks

[support_s]

System recommended content:

1. Virtual Connect CLI Network Management Guide with Nexus vPC Configuration

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Have you tried the commands given in this guide?

HPE Virtual Connect Manager Command Line Interfacefor c-Class BladeSystem User Guide, Page 127
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00102213en_us

Thank You!
Let HPE Support Videos page help you troubleshoot.

[AmRa]

Collect 'show all *' command output. Which you can further review using Notepad++.

This command will collect complete VC domain configuration (including server profiles, networks, etc ). 

[SeanDWA · Accepted solution]

I used 'show config' and grep'd out the information - I was hoping for something a little more elegant, but it works.