HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

ESXi on BL460c G7 disconnected

 
Jannarong Poopirom
Occasional Contributor

ESXi on BL460c G7 disconnected

Hi all,

 

I've a problem with my blade server. It has ESXi 5.5.0-2403361 running for months until I add a new iSCSI storage to it.

Once I add iSCSI target, ESXi becomes unresponsive. I tried to ping to it's ip and was unreachable. From DCUI also cannot ping to other hosts.

 

I checked the lan cable and switch all light up normally, also checked in iLO and no error. The interconnect is 1 Gb Ethernet Pass-Thru and shows as connected.

 

What should I check or do to fix this problem. ESXi was restarted, reset to default configuration still doesn't help.

In ESXi Configuration Management Network shows both NICs disconnected.

 

My server blade is in Bay 3 in the picture.

 

BR,

Jp

3 REPLIES
Torsten.
Acclaimed Contributor

Re: ESXi on BL460c G7 disconnected

It is very important that CNA (network card) firmware and driver versions match. Please check! What versions are running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jannarong Poopirom
Occasional Contributor

Re: ESXi on BL460c G7 disconnected

How can I check 'CNA (network card) firmware and driver versions match' ?

 

It was running for months without problems, and no ESXi update. Now I can only access DCUI.

Torsten.
Acclaimed Contributor

Re: ESXi on BL460c G7 disconnected

You should see both in the network tab of the console.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!