BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

FlexFabric 20/40 F8 config

StevenCarter
Occasional Visitor

FlexFabric 20/40 F8 config

We are running two FlexFabric 20/40 F8 in a C7000 chassis, one for each Fabric.  Currently port X1 is Fibre Ethernet and ports X5-X8 are FCoE SAN connections, connected to a Brocade switch.  Each blade in the chassis is running ESXi 5.0 and if we activate all ports(X5-X8) on the chassis only host connected to X5 can see storage.  If I enable only one port individually(X5 or X6 or X7 or X8), then all blades see storage on both fabrics.  Even when enabling just two ports X5-X6 only storage associated with X5 will show in vsphere. Looking at the cookbook i believe only 1 FCoE pair can function in each FlexFabric(X5-X6 or X7-X8).  Any suggestions?