HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Flexfabric direct connect to 3PAR

 
chuckk281
Trusted Contributor

Flexfabric direct connect to 3PAR

John had a VC FlexFabric and 3PAR Storage Array question:

 

******************

 

When you define a SAN Fabric as direct-attached to 3PAR do all the uplinks from the Flexfabric module have to connect to the same 3PAR controller node? I am asking this as the rule when connecting to a SAN Switch using VC-FC or Flexfabric was all the uplinks defined in the SAN Fabric had to connect to the same SAN Switch, has this changed for Direct-Attached to 3PAR?

 

**************

 

Info from Kant:

 

****************

 

VC Fibre Channel cookbook has all the details - http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01702940/c01702940.pdf

 

*****************

 

Other comments or suggestions?