HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

HP VC 8Gb 24-Port FC Module - Management IP access

 
SOLVED
Go to solution
Jay Remy
Occasional Advisor

HP VC 8Gb 24-Port FC Module - Management IP access

Hello Forum,

 

We have a Matrix c7000 Blade Chassis with HP VC 8Gb 24-Port FC Modules in Bay 3 and Bay 4.  Both modules have been assigned a Management IP Address through EBIPA.

 

Is there a management page that we can log into using this management IP?  Or is all configuration performed inside Virtual Connect?

3 REPLIES
Bart_Heungens
Honored Contributor
Solution

Re: HP VC 8Gb 24-Port FC Module - Management IP access

Hi,

 

Yes all is configured inside the Virtual Connect Manager...

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
Jay Remy
Occasional Advisor

Re: HP VC 8Gb 24-Port FC Module - Management IP access

Thanks! Kudos for you.
Bart_Heungens
Honored Contributor

Re: HP VC 8Gb 24-Port FC Module - Management IP access

Thanks, you're welcome...

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !