BladeSystem Virtual Connect

HP VC FlexFabric 10Gb/24-Port Module rebooting continuously

 
AliYousefian
Occasional Visitor

HP VC FlexFabric 10Gb/24-Port Module rebooting continuously

Hi there,

I have a c7000 Enclosure G3 with two OA version 4.96 + two HP VC FlexFabric 10Gb/24-Port Module.

One of the FlexFabric modules is ok and working well but another one rebooting continuously and not booting. Even if I installed the module alone again it's not booting.

I connect to the OA through the SSH then run these commands: 

connect interconnect 1

then press Enter to show the interconnect console:

the console shows me the module rebooting continuously:'

//////////////////////

U-Boot 2009.06-HPVC (Jan 26 2018 - 00:45:41)

CPU: 8535/8536, Version: 1.2, (0x80370092)
Core: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU0:800 MHz,
CCB:400 MHz,
DDR:200 MHz (400 MT/s data rate) (Synchronous), LBC:50 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: HPE Virtual Connect FlexFabric 10Gb/24-Port Module for BladeSystem c-Class
CPLD: Version 6
UPMA: Configured for CompactFlash
I2C: ready
DRAM:
DIMM type: TS128MSQ64V8U DDR: 1 GB (DDR2, 64-bit, ECC off, 400 MHz)

------------------------------------------------------------------------------
Command: D)isconnect, C)hange settings, send B)reak, E)xit command mode X)modem send > C
Change settings for: L)ocal Session, R)emote Port [I/O Bay 5], E)xit E
Connected to integrated switch 5 at 115200,N81.
Escape character is '<Ctrl>_' (Control + Shift + Underscore)
------------------------------------------------------------------------------
^R
rcS: Mounting /images
IMAGES: recovering journal
IMAGES has been mounted 1 times without being checked, check forced.
IMAGES: 22/82080 files (0.0% non-contiguous), 9455/163840 blocks
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with journal data mode.
rcS: Mounting /dump
DUMP: recovering journal
DUMP has been mounted 1 times without being checked, check forced.
DUMP: 26/33040 files (7.7% non-contiguous), 7448/66008 blocks
kjournald starting. Commit interval 60 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with journal data mode.
FIPS-mode test application
FIPS 2.0 validated module 14 Mar 2012

DRBG AES-256-CTR DF test started
DRBG AES-256-CTR DF test OK
POST started
Integrity test started
Integrity test OK
DRBG AES-256-CTR DF test started
DRBG AES-256-CTR DF test OK
DRBG AES-256-CTR test started
DRBG AES-256-CTR test OK
DRBG SHA256 test started
DRBG SHA256 test OK
DRBG HMAC-SHA256 test started
DRBG HMAC-SHA256 test OK
DRBG P-256 SHA256 test started
DRBG P-256 SHA256 test OK
X9.31 PRNG keylen=16 test started
X9.31 PRNG keylen=16 test OK
X9.31 PRNG keylen=24 test started
X9.31 PRNG keylen=24 test OK
X9.31 PRNG keylen=32 test started
X9.31 PRNG keylen=32 test OK
Digest SHA1 test started
Digest SHA1 test OK
Digest SHA1 test started
Digest SHA1 test OK
Digest SHA1 test started
Digest SHA1 test OK
HMAC SHA1 test started
HMAC SHA1 test OK
HMAC SHA224 test started
HMAC SHA224 test OK
HMAC SHA256 test started
HMAC SHA256 test OK
HMAC SHA384 test started
HMAC SHA384 test OK
HMAC SHA512 test started
HMAC SHA512 test OK
CMAC AES-128-CBC test started
CMAC AES-128-CBC test OK
CMAC AES-192-CBC test started
CMAC AES-192-CBC test OK
CMAC AES-256-CBC test started
CMAC AES-256-CBC test OK
CMAC DES-EDE3-CBC test started
CMAC DES-EDE3-CBC test OK
Cipher AES-128-CBC test started
Cipher AES-128-CBC test OK
Cipher AES-192-CBC test started
Cipher AES-192-CBC test OK
Cipher AES-256-CBC test started
Cipher AES-256-CBC test OK
CCM test started
CCM test OK
GCM test started
GCM test OK
XTS AES-128-XTS test started
XTS AES-128-XTS test OK
XTS AES-256-XTS test started
XTS AES-256-XTS test OK
Cipher DES-EDE3-CBC test started
Cipher DES-EDE3-CBC test OK
Cipher DES-EDE3-CBC test started
Cipher DES-EDE3-CBC test OK
Signature RSA test started
Signature RSA test OK
Signature ECDSA P-224 test started
Signature ECDSA P-224 test OK
Signature ECDSA K-233 test started
Signature ECDSA K-233 test OK
Signature DSA test started
Signature DSA test OK
ECDH P-224 test started
ECDH P-224 test OK
POST Success
Power-up self test successful
rcS: Initializing kernel RNG entropy pool
Setting system hostname to VCEFX7C933900J0
keepalive[139]: keepalive daemon started
keepalive daemon status -- no active entries
keepalive[139]: keepalive daemon status -- no active entries

rcS: Starting syslog
keepalive[139]: Registering process '/usr/local/sbin/randomd' (pid = 60).
keepalive[162]: Executing script '/etc/keepalive.d/rsyslogd.start' on behalf of process '/usr/local/sbin/rsyslogd'.
rcS: ============ Start-up ============
rcS: Initializing hardware
Boot instance: 6D9DD78C-30F56A49-BD3DAED0-5A31FF46
rcS: Starting DHCP client
rcS: Starting sshd
rcS: Starting ismicd
rcS: Booted from firmware bank I (4.62 2018-01-26T07:07:32Z)
rcS: Starting ip6addrd daemon
rcS: Preparing VCM Applications
rcS: Starting VCETH Applications
rcS.app: Starting VC Applications
MED: Loading resources from /usr/local/vceth/data/med/inittransient.sql
MED: Loading resources from /usr/local/vceth/data/med/inittransient_6.sql
MED: Loading resources from /usr/local/vceth/data/med/initclimeta.sql
MED: Loading resources from /usr/local/vceth/data/med/initdfltpidled_6.sql
rcS.app: All VC Applications spawned
rcS: Starting VCM Applications
rcSvcm: Copying PAM configuration files to /tmp/vcm/config/userDb
check start called
touch: /tmp/vcm/config/apache/CipherStrength: No such file or directory
$Starting httpd: Generating new RSA key-pair
eeprom: unexpected value for modified (0x789abcde)
eeprom: unexpected value for modified (0x789abcde)
Unable to handle kernel paging request for data at address 0x00000014
Faulting instruction address: 0xf93ba698
Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT HPVCENETFCOE
Modules linked in: fc2Mod agDrv swlogMod ensMod cnsMod vsbMod eepromMod drvtrcMod linux_bcm_knet linux_user_bde linux_kernel_bde
**bleep**: f93ba698 LR: f93af438 CTR: f93ba648
REGS: d506b9c0 TRAP: 0300 Not tainted (2.6.32.60)
MSR: 00029000 <EE,ME,CE> CR: 44288428 XER: 20000000
DEAR: 00000014, ESR: 00000000
TASK = d4e56640[857] 'diagAgent' THREAD: d506a000
GPR00: 00000000 d506ba70 d4e56640 f9444608 0000000a 00000014 d506bab4 0f8e4f94
GPR08: 0000000a 00000014 e4029cc8 00000000 c0263830 100a0b20 1000685c 10006814
GPR16: 10006834 00000000 10098124 10242f0c 10242f58 00000001 0000005c 4904cb68
GPR24: 00000014 102430e4 102430f4 d4f22e20 f11e0000 00000000 c014695c d5040000
**bleep** [f93ba698] ASICioctl+0xb4b0/0x13afc [agDrv]
LR [f93af438] ASICioctl+0x250/0x13afc [agDrv]
Call Trace:
[d506ba70] [f93bc068] ASICioctl+0xce80/0x13afc [agDrv] (unreliable)
[d506be80] [c0083114] vfs_ioctl+0x84/0xac
[d506bea0] [c0083904] do_vfs_ioctl+0x680/0x708
[d506bf10] [c00839cc] sys_ioctl+0x40/0x70
[d506bf40] [c000dc2c] ret_from_syscall+0x0/0x3c
Instruction dump:
5400103a 392945d4 7fe9002e 2f9f0000 40be0008 4800819c 8081003c 2b8400a6
409d0008 480085c8 817f0000 5489083c <7c0b4a2e> 2f800000 409e0008 480085b0
Kernel panic - not syncing: Fatal exception
Rebooting in 1 seconds..

////////////////////////

this just repeating and repeating.

How I can fix this issue?