BladeSystem - General
1745904 Members
4438 Online
108723 Solutions
New Discussion

HP VC ssytem log: VCM-OA Communicaiton down

 
Shadid
Occasional Contributor

HP VC ssytem log: VCM-OA Communicaiton down

HI community,

We are using 2 HP C7000 enclosure in one of our produciton sites. Enclosures are operating in link-loss mode.

Each enclosure has 2 VC modules and the VC domain is formed by 4 VC mosules in two enclosures. 

OA firmware version is: 4.40

VC firmware version is: 4.45

In virtual connect system log we randomly experience VCM-OA communication down event.

I have removed DNS entries from EBIPA section for Interconnect bays. (since this was recommended by some of the community posts), but this didnt change the situation.

Detail of the error is like,

[VCD:enc1:1003:Critical] VCM-OA communication down
[ENC:enc1:2011:Critical] Enclosure state NO_COMM : Enclosure is no-comm, Previous: Enclosure state OK, Cause: Enclosure enc1 unable to communicate with OA.

As per my knowledge, VCM and OA shall try to communicate internally through enclosure back pane.

Can anyone please suggest the root cause and resolution please??

 

regards,

Shadid

1 REPLY 1
Barznj
Occasional Visitor

Re: HP VC ssytem log: VCM-OA Communicaiton down

Dear Shadid,

 

Did you find any solution for this? what was the root cause for it?

we noticed the same issue in the same Firmware versions.

appreciate your kind feedback

 

thanks

 

barznj