BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Virtual Connect FlexFabric 10Gb/24-port showing sfp as incompatible

 
SOLVED
Go to solution
nkldh
Occasional Advisor

HP Virtual Connect FlexFabric 10Gb/24-port showing sfp as incompatible

Hi All,

 

I have HP two Virtual Connect FlexFabric 10Gb/24-port. I am going to install four HP 8Gb Shortwave B-series Fibre Channel 1 Pack SFP+ Transceiver (HP Part No. AJ716A ). But immediately in Virtual Connect Manager i can see it is showing as incompatible SFP's. I am installing them on Port X1, X2, X3 and X4 only.

 

 

3 REPLIES
Hongjun Ma
Trusted Contributor
Solution

Re: HP Virtual Connect FlexFabric 10Gb/24-port showing sfp as incompatible

U need to define San fabric in VC manager and assign these ports to the fabric. After that,link should be fine. By default, all ports are Ethernet.

 

My VC blog: http://hongjunma.wordpress.com



nkldh
Occasional Advisor

Re: HP Virtual Connect FlexFabric 10Gb/24-port showing sfp as incompatible

Thanks for your support

omz
Occasional Contributor

Re: HP Virtual Connect FlexFabric 10Gb/24-port showing sfp as incompatible

hello i have the same problem i need detail for solution