BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Jazz7
Occasional Visitor

HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Hi All

I encounter problem when I configure hp c7000 enclosure virtual connect manager. 

I have 3 network connection as below

  • MGMT = interconnect Bay 1 x5 / Bay 2 x5
  • All_Prod= interconnect Bay 1 x6 / Bay 2 x6
  • DMZ= interconnect Bay 1 x7 / Bay 2 x7

Blade Proliant BL660c install with VMware vsphere as VMware host.

Server profile 

  • LOM1:1a MGMT
  • LOM1:2a MGMT
  • LOM1:1c All_Prod
  • LOM1:2C All_Prod
  • LOM1:1d DMZ
  • LOM1:2d DMZ

I have a VM client server with window Server 2012 with 2 Nic. Below are my problem.

Nic 1 = VLAN01 (All_Prod)

  • Failed to ping gateway

Nic 2 = VLAN10 (DMZ)

  • Able to ping gateway successful

 

If I use my own notebook plug into the physical switch port and hardcode my notebook tcp/ip setting to DMZ IP address, I am able to ping default gateway. 

Can anyone advise what went wrong on my configuration. 

Thank you

Jazz

1 REPLY
Adrian Clint
Honored Contributor

Re: HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Is All_Prod multiple VLANs?

Have you setup VLAN tagging correctly on the blade?