HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
Showing results for 
Search instead for 
Did you mean: 

HP VirtualConnect 3.51/3.61 UI not on primary fabric

Occasional Visitor

HP VirtualConnect 3.51/3.61 UI not on primary fabric


Our flex 10 fabric is giving following error :

The active Virtual Connect Manager is not at this IP address currently.
We will continue to check every 30 seconds. If you expect the active Virtual Connect Manager at this IP address, please wait

I was trying to upgrade firmware but that process was not moving at all for an hour or so, so I aborted it from client side. Now we are stuck. 

I have already tried VSCU resetvcm and also have removed / insterted OA blades and sleeve. Only option now it seem is to remove primary switch and put it back, but I am afraid it would affect my production network. Is there any way to regain control? 

Thanks in advance.