BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

How to auto-failback NPIV in manual mode with VC-FC ?

 
SOLVED
Go to solution
Highlighted
liuyl_it
Advisor

How to auto-failback NPIV in manual mode with VC-FC ?

Anyone could tell me how to auto-failback NPIV in manual login redistribution mode after the fault SAN link is recovered,especially for none SAN Fabric configuration?

1 REPLY
Sharis
Advisor
Solution

Re: How to auto-failback NPIV in manual mode with VC-FC ?

Hello,

The login re-distribution scheme to use for load balancing. Values include "Auto" and "Manual".

The default login re-distribution is "Manual" for a "FabricAttach" fabric. Login re-distribution is not supported for "DirectAttach" fabrics.

The HPE VC 4Gb FC Module, HPE VC 8Gb 20- Port FC Module, and HPE VC 8Gb 24-Port Module support only manual login redistribution.

The HPE VC FlexFabric 10Gb/24-port Module and HPE VC FlexFabric 20/40 F8 Module support both auto and manual login redistribution.

For more info, refer VCM  release notes :-
https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=null&docLocale=en_US&docId=emr_na-a00055966en_us&withFrame

Hope this helps.