BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

How to extend LUN on HP Blade 460c G7

dirkbucket
Occasional Visitor

How to extend LUN on HP Blade 460c G7

I have a HP Blade 460c G7 all ready setup. Storage is connected using EMC VNX through fiber.  I would like to expand a LUN on one of the virtual servers.  I have expanded the LUN on VNX but the virtual server does not see it.   How do I expand the LUN so virtual server will pick it up?  I have went through the HP Virtual Connect Manager page and dont see any settings. 

Thanks

2 REPLIES
Torsten.
Acclaimed Contributor

Re: How to extend LUN on HP Blade 460c G7

This has nothing to do with virtual connect, but depends on your virtual server environment (ESX, hyper-v, etc ...)


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
gavrilenkov
Advisor

Re: How to extend LUN on HP Blade 460c G7

The need to expand the "disk manager" in windows