HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Issue: c7000 with HP VC Flex-10 Enet Module

 
Raghu Chikkamenahalli
Frequent Advisor

Issue: c7000 with HP VC Flex-10 Enet Module

Hi,

 

We have a c7000 enclosure with HP VC Flex-10 Enet Module. The sfp module is installed on the Flex10 Ethernet is 10Gbps.  Connected a fabric cable from HP Procurve 2848 switch (  It is 1Gbps )  to the X6 port in the  HP VC Flex-10 Enet Module . When tried to create a network profile, the concerned port shows, link is not available.

Tried with the copper ( using the RJ45sfp  in the VC and UTP in the switch ) it is working fine. Could you please let me know if there any pointer to get the link

 

Thanks in Advance.


Many Thanks,
Regards,

Raghu.