BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

More than 28 VLAN on a single FlexNIC with VC FW 3.30

 
SOLINT
Occasional Visitor

More than 28 VLAN on a single FlexNIC with VC FW 3.30

Hello all, according to the documentation of VC FW 3.30 the VLAN limit for downlinks is now 162, but we've upgraded some enclosures and the GUI still shows 28 as the limit for downlinks.

 

Is there any special requirement to use the new limit?

 

Thanks in advance, and best regards.

2 REPLIES
Psychonaut
Respected Contributor

Re: More than 28 VLAN on a single FlexNIC with VC FW 3.30

You are still using the Legacy Capacity the setting is under Ethernet/Advaced Settings in VC Manger:

 

Capture.JPG

First get all the VC's in that same domain updated and then can select the Expanded Capacity.

 

Be aware - the only way to back out of this is to delete and recreate the domain.

 

Sudhakarang
Occasional Visitor

Re: More than 28 VLAN on a single FlexNIC with VC FW 3.30

Select expanded vlan capacity and check also  enable "VLAN Tunneling", instead of the default "Mapped VLANs"