Multiple SAN Fabrics on Virtual Connect Fibre Channel Modules

[chuckk281]

Brian had a Virtual Connect Fibre Channel question:

*************************

I have never tried but can you have say 4 separate fabrics go into a VC FC module pair.

For Example

SAN-FAB-A -> Module 3, ports 1-4

SAN-FAB-B -> Module 3, ports 5-8

SAN-FAB-C -> Module 4, ports 1-4

SAN-FAB-C -> Module 4, ports 5-8

I don’t see why it wouldn’t work,  customer has a requirement to have servers to be on different SAN’s for security requirements…

****************

Alexander replied:

***********************

Hello, Brian!

Yes, it will work! And it is supported as far as I know.

regards,

******************

Get more info at : http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01096654/c01096654.pdf

Comments or suggestions for Brian?