HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

NC553m Dual Port FlexFabric card support 8Gb vHBA

 
chuckk281
Trusted Contributor

NC553m Dual Port FlexFabric card support 8Gb vHBA

Thomas had a Fibre Channel question:

 

********************

 

If NC553m dual port flexfabric card or BL490c G7 and BL620c G7 integrated NC553i card support 8GB vHBA when used with HP Virtual connect Flexfabric 10Gb/24-port Module?

 

Based on our previous testing, it support 4Gb only.  We want to know if there are new firmware released that can support 8Gb. Many thanks.

 

Description in PB:

Each FlexNIC and FlexHBA is recognized by the server as a PCI-e physical function device with adjustable speeds from 100Mb to 10Gb in 100Mb increments*

NOTE: Bandwidth adjustment supports speeds from 1Gb to 10Gb in 100Mb increments on NC553i 2-Port FlexFabric 10Gb Converged Network Adapters and NC553m 2-Port FlexFabric 10Gb Converged Network Adapter.

 

Best Regards.

 

*******************

 

Shigeru replied:

 

********************

 

You can set up FCoE HBA connections with speed 1,2,4,8, Custom.

Please see page 115 on the manual below.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02516247/c02516247.pdf

 

*****************

 

Any other comments or questions?