BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Newb needs help: Flex-10 x7 and x8 uplinks

zx5go
Occasional Visitor

Newb needs help: Flex-10 x7 and x8 uplinks

New c3000 chassis with a single Flex-10.  I want to use port 7 in an ethernet network but when I define the network and add that port under status it shows "incompatible".  I do not have anything in port 8 and I have a copper SFP+ in port 7 (I have the same in ports 1-6).  What I intend to do is use port 6 and 7 as a private network and setup a DMZ space.

 

What do I have to do to use port 7 in the virtual Connect Manager when I define an new enternet network?

__________________________
Desire is irrelevant.

A grateful nation never forgets.