HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

No Physical Link on Virtual Connect-Flex10 Module

 
chuckk281
Trusted Contributor

No Physical Link on Virtual Connect-Flex10 Module

Chris was having a problem at a customer site:

 

**************************

 

Hello,

 

Having an issue with a chassis that has a single active 10GbE LR uplink in X7 (I didn’t pick the port).  Tried to plug in another live LR transceiver to X2 but there is no physical link being established.  The link light is not illuminating and the port status is ‘unavailable’.  Both ends of the single mode fiber have the correct transceivers for the appropriate gear.  We had the network guy pull negotiation off the links on the switch side, bounced the ports, but they are still not coming up.

 

Any suggestions?  What am I doing wrong and/or overlooking?

 

****************************

 

But a light appeared and the problem was solved!

 

Chris reports success:

 

****************

 

Closing the Loop:  Customer used an incorrect SFP+ module.  Sorry to bother.

 

******************

 

Always good to get closure