HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Onboard Administrator firmware update and VC configurations

 
DavoudTeimouri
Occasional Advisor

Onboard Administrator firmware update and VC configurations

Hi everyone,

I want to update my OA firmware to 4.01, do I need to take backup from VC configuration or not?

Thanks

1 REPLY
JimTonic
Advisor

Re: Onboard Administrator firmware update and VC configurations

Hi!

 

As a matter of fact the backup of the domain config ist "cheap" and saves your current configuration in one file.

 

So no reason not to do it, it is a save bet.

 

If you really need it depends a) on the current firmware level you are running and b) the instructions from the hp release notes for virtual connect 4.01 which you will find here:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03801912/c03801912.pdf

 

There are separate sections depending on the firmware level you are upgrading from.

 

So just stick to the fine print and you should be ok.