BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

PSOD after blade server failed to start,fo blade server BL460C Gen8

john124
Occasional Visitor

PSOD after blade server failed to start,fo blade server BL460C Gen8

Hello,

Anyone knows about the way forward for solving the problem f PSOD when the server is not booting well but keeps giving purple screen.

I have tried to install different versions of ESXi 5.0,ESXi5.5 and Esxi 6.5 even ESXi 5.5 but the server says no network card.

Can anyone advise the way forward for  bringing back my server up and running?

Before I have had a problem of power failure in my datacenter and the server can`t be back when the power comes back and then I did reset the fuser for my blade server.

I may indicate that before it was running ESXi 5.5.

 

Kindly advise,thank you!!

 

1 REPLY
FM-ISS
HPE Pro

Re: PSOD after blade server failed to start,fo blade server BL460C Gen8

Hi @john124 have you tried 1st update server firmware than download HPE ESXI custom image than deploy the ESX ?

it means SPP gen8.1 apply on this Blade than download from here the ESX custom imagem : https://www.hpe.com/us/en/servers/hpe-esxi.html 

Maybe this  occur due a firmware version of the NIC mezz or the driver on this image .

efforts.

 

 

 

I´m HPE Employee