BladeSystem Virtual Connect

Possible to reset a single port on HP VC 8gb 24-Port FC Module

 
rpommier
Established Member

Possible to reset a single port on HP VC 8gb 24-Port FC Module

We have a HP VC 8gb 24-Port FC Module that we tried to transfer connections over to a new Cisco Switch. We moved the fiber cable over and it wouldn't link. So we moved it back to the original switch and it's still not connected, no link and Virtual Connect Manager shows that it's not logged in. 

Is there a way to reset a single port on the FC module? I can't find a CLI command specifically for the FC port.

Any nudge in the right direction would be appreciated.

Thanks

3 REPLIES 3
derick_souza
Frequent Advisor

Re: Possible to reset a single port on HP VC 8gb 24-Port FC Module

there is no CLI command. All management are thourgh virtual connect manager.

you could check the configuration guide - https://support.hpe.com/hpesc/public/docDisplay?docId=c02616817

 

rpommier
Established Member

Re: Possible to reset a single port on HP VC 8gb 24-Port FC Module

We have a maintenance window Sunday, going to try to reset it

rmay_bk
Valued Contributor

Re: Possible to reset a single port on HP VC 8gb 24-Port FC Module

I've had this happen before.  Sometimes changing the port speed then changing it back will "unstick" the port and get me back online.