HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem adding new HP VC Flex-10 Enet Module to C3000

 
Kalmah
Occasional Visitor

Problem adding new HP VC Flex-10 Enet Module to C3000

Hello,

 

We currently have a HP C3000 with a VC Flex-10 Enet Module installed in interconnect bay 1 running firmware version 4.30. We have recently purchased another module and placed it in interconnect bay 2 which is running firmware version 2.12. Currently VCM is reporting that it is incompatible due to the firmware which I also assume is preventing the stacking links from working. When I attempt to run VCSU and update the firmware I am recieving the following error: 

 

 

Log:

 

[Thu Oct 01 13:08:14 2015]
[Thu Oct 01 13:08:14 2015] -------------------------------------------------------------------------------
[Thu Oct 01 13:08:14 2015] HP BladeSystem c-Class Virtual Connect Support Utility
[Thu Oct 01 13:08:14 2015] Version 1.11.1 (Build 9)
[Thu Oct 01 13:08:14 2015] Build Date: Jul 9 2015 14:31:22
[Thu Oct 01 13:08:14 2015] Copyright (C) 2006-2015 Hewlett-Packard Development Company, L.P.
[Thu Oct 01 13:08:14 2015] All Rights Reserved
[Thu Oct 01 13:08:14 2015] -------------------------------------------------------------------------------
[Thu Oct 01 13:08:14 2015]
[Thu Oct 01 13:08:14 2015] Please enter action ("help" for list):
[Thu Oct 01 13:08:18 2015] Please enter Onboard Administrator IP Address:
[Thu Oct 01 13:08:23 2015] Please enter Onboard Administrator Username:
[Thu Oct 01 13:08:26 2015] Please enter Onboard Administrator Password:
[Thu Oct 01 13:08:29 2015] Please enter firmware package location:
[Thu Oct 01 13:08:37 2015] Please enter Configuration backup password (Optional):
[Thu Oct 01 13:08:38 2015] Please enter Force Update options if any (eg: version,health):
[Thu Oct 01 13:08:42 2015] Please enter VC-Enet module activation order if any (eg: parallel or odd-even
[Thu Oct 01 13:08:42 2015] or serial or manual. Default: odd-even):
[Thu Oct 01 13:08:43 2015] Please enter VC-FC module activation order if any (eg: parallel or odd-even or
[Thu Oct 01 13:08:43 2015] serial or manual. Default: serial):
[Thu Oct 01 13:08:44 2015] Please enter the time (in minutes) to wait between activating or rebooting
[Thu Oct 01 13:08:44 2015] VC-Enet modules (max 60 mins. Default: 0 mins):
[Thu Oct 01 13:08:45 2015] Please enter the time (in minutes) to wait between activating or rebooting
[Thu Oct 01 13:08:45 2015] VC-FC modules (max 60 mins. Default: 0 mins):
[Thu Oct 01 13:08:45 2015] Initializing, please wait... [Step 1 of 2]
[Thu Oct 01 13:09:34 2015] The target configuration is integrated into a Virtual Connect Domain. Please
[Thu Oct 01 13:09:34 2015] enter the Virtual Connect Domain administrative user credentials to continue.
[Thu Oct 01 13:09:34 2015] User Name:
[Thu Oct 01 13:09:39 2015] Password:
[Thu Oct 01 13:10:19 2015] Gathering module and package information [Step 2 of 2]
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] Force Health option is specified. Attempting to upgrade unhealthy modules.
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] You can use the '-a report' option to display the details for
[Thu Oct 01 13:11:09 2015] the requested update operation.
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] If you would like to try to force an update on the same
[Thu Oct 01 13:11:09 2015] firmware version, you can use the '-f version' option. If a previous
[Thu Oct 01 13:11:09 2015] installation was not completed, please check the log file for more information.
[Thu Oct 01 13:11:09 2015] The following modules will NOT be updated:
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] ===============================================================================
[Thu Oct 01 13:11:09 2015] Enclosure Bay Module Current Version Status
[Thu Oct 01 13:11:09 2015] ===============================================================================
[Thu Oct 01 13:11:09 2015] SGH015XEL8 1 HP VC Flex-10 4.30 VCM configuration
[Thu Oct 01 13:11:09 2015] Enet Module 2014-07-08T20:09:19Z out of sync
[Thu Oct 01 13:11:09 2015] -------------------------------------------------------------------------------
[Thu Oct 01 13:11:09 2015] SGH015XEL8 2 HP VC Flex-10 2.12 VCM configuration
[Thu Oct 01 13:11:09 2015] Enet Module 2009-08-06T16:45:57Z out of sync
[Thu Oct 01 13:11:09 2015] -------------------------------------------------------------------------------
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] ERROR: Fatal error. One or more modules is preventing VCSU from continuing.
[Thu Oct 01 13:11:09 2015] Correct the conditions listed above and retry.
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] Total execution time: 00:02:24
[Thu Oct 01 13:11:09 2015]
[Thu Oct 01 13:11:09 2015] VCSU log file is available at the following location:
[Thu Oct 01 13:11:09 2015] C:\Users\david\AppData\Local\Temp\vcsu-24736.log

[Thu Oct 01 13:08:45 2015] (30380)[VcsuInit.cpp:457] : VCSU Library Version: 1.11.1.9
[Thu Oct 01 13:08:46 2015] (30380)[GetRemoteEndpointInfo.cpp:91] : OA found at 172.29.0.130 with version 4.30
[Thu Oct 01 13:08:48 2015] (30380)[VcsuCore.cpp:392] : Target name: BladeSystem c3000 Enclosure
[Thu Oct 01 13:08:48 2015] (30380)[OaWrap.cpp:823] : OA IP Address: 172.29.0.130
[Thu Oct 01 13:08:48 2015] (30380)[OaWrap.cpp:829] : OA1 IP Address: 172.29.0.130
[Thu Oct 01 13:08:50 2015] (30380)[VcsuInit.cpp:578] : [SGH015XEL8] OA Version: 4.30
[Thu Oct 01 13:08:52 2015] (30380)[OaWrap.cpp:443] : Onboard Administrator Role: Active
[Thu Oct 01 13:09:15 2015] (30380)[OaWrap.cpp:443] : Onboard Administrator Role: Active
[Thu Oct 01 13:09:17 2015] (30380)[VcsuCore.cpp:5763] : Bay 1 IP Address is 172.29.0.170 and type is IPv4
[Thu Oct 01 13:09:18 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.170
[Thu Oct 01 13:09:19 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.170
[Thu Oct 01 13:09:19 2015] (30380)[VcsuCore.cpp:653] : Bay 1 Firmware Version: 4.30 2014-07-08T20:09:19Z
[Thu Oct 01 13:09:23 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.170
[Thu Oct 01 13:09:24 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.170
[Thu Oct 01 13:09:26 2015] (30380)[VcsuCore.cpp:5763] : Bay 2 IP Address is 172.29.0.171 and type is IPv4
[Thu Oct 01 13:09:27 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.171
[Thu Oct 01 13:09:27 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.171
[Thu Oct 01 13:09:28 2015] (30380)[VcsuCore.cpp:653] : Bay 2 Firmware Version: 2.12 2009-08-06T16:45:57Z
[Thu Oct 01 13:09:31 2015] (30380)[VcsuCore.cpp:1960] : Module not present in bay 3
[Thu Oct 01 13:09:32 2015] (30380)[VcsuCore.cpp:1960] : Module not present in bay 4
[Thu Oct 01 13:09:32 2015] (30380)[VcsuCore.cpp:1029] : Domain configuration is present
[Thu Oct 01 13:09:33 2015] (30380)[VcsuCore.cpp:1043] : This is primary enclosure
[Thu Oct 01 13:09:33 2015] (30380)[VcsuInit.cpp:749] : OA VC Mode is set
[Thu Oct 01 13:09:34 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:09:43 2015] (30380)[OaWrap.cpp:1437] : OA Soap Call failed with error 404
[Thu Oct 01 13:09:44 2015] (30380)[VcmWrap.cpp:1732] : VCM Firmware Version: 4.30
[Thu Oct 01 13:09:44 2015] (30380)[VcsuCore.cpp:1259] : VCM IP Address: 172.29.0.170
[Thu Oct 01 13:09:44 2015] (30380)[VcsuCore.cpp:1260] : VCM Firmware Version: 4.30
[Thu Oct 01 13:09:44 2015] (30380)[VcsuCore.cpp:1029] : Domain configuration is present
[Thu Oct 01 13:09:44 2015] (30380)[VcsuCore.cpp:1043] : This is primary enclosure
[Thu Oct 01 13:09:45 2015] (30380)[VcsuInit.cpp:810] : VCM user authenticated successfully
[Thu Oct 01 13:09:46 2015] (30380)[VcmWrap.cpp:1732] : VCM Firmware Version: 4.30
[Thu Oct 01 13:09:49 2015] (30380)[VcmWrap.cpp:901] : Number of enclosures in the domain: 1
[Thu Oct 01 13:09:52 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:09:55 2015] (30380)[VcsuCore.cpp:5531] : VCM is in Unlocked mode
[Thu Oct 01 13:09:56 2015] (30380)[VcsuCore.cpp:5361] : User has domain privileges
[Thu Oct 01 13:09:57 2015] (30380)[VcmWrap.cpp:1732] : VCM Firmware Version: 4.30
[Thu Oct 01 13:09:59 2015] (30380)[VcmWrap.cpp:683] : User has the privilege to update the firmware
[Thu Oct 01 13:09:59 2015] (30380)[VcmWrap.cpp:688] : User has the privilege to save config
[Thu Oct 01 13:09:59 2015] (30380)[VcmWrap.cpp:693] : User has the privilege to save support information
[Thu Oct 01 13:10:00 2015] (30380)[VcmWrap.cpp:1732] : VCM Firmware Version: 4.30
[Thu Oct 01 13:10:00 2015] (30380)[VcmWrap.cpp:1684] : VCM FIPS Mode is disabled
[Thu Oct 01 13:10:01 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.170
[Thu Oct 01 13:10:03 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.170
[Thu Oct 01 13:10:07 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:10:12 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:10:13 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:10:16 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.170
[Thu Oct 01 13:10:17 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.170
[Thu Oct 01 13:10:17 2015] (30380)[GetDomainInfo.cpp:161] : Rollback downgrade will not be supported. Presence of PoweredON servers and server profile migration after upgrade will not allow downgrade
[Thu Oct 01 13:10:19 2015] (30380)[VcmWrap.cpp:767] : Domain has Failed Stacking Connection
[Thu Oct 01 13:10:19 2015] (30380)[VcmWrap.cpp:778] : Domain has Failed Stacking Redundancy
[Thu Oct 01 13:10:19 2015] (30380)[VcsuFirmware.cpp:679] : Verifying package signature...
[Thu Oct 01 13:10:20 2015] (30380)[VcsuFirmware.cpp:697] : Extracting package
[Thu Oct 01 13:10:39 2015] (30380)[Extract.cpp:125] : Done extracting PackageDesc.xml from VCpackage.tar
[Thu Oct 01 13:10:42 2015] (30380)[Extract.cpp:125] : Done extracting vcenet.img from VCpackage.tar
[Thu Oct 01 13:10:47 2015] (30380)[Extract.cpp:125] : Done extracting vcenetfcoe.img from VCpackage.tar
[Thu Oct 01 13:10:50 2015] (30380)[Extract.cpp:125] : Done extracting vcg2enet.img from VCpackage.tar
[Thu Oct 01 13:10:53 2015] (30380)[Extract.cpp:125] : Done extracting vcfc.img from VCpackage.tar
[Thu Oct 01 13:10:55 2015] (30380)[Extract.cpp:125] : Done extracting vcfc2.img from VCpackage.tar
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:709] : Parsing package information
[Thu Oct 01 13:11:01 2015] (30380)[Extract.cpp:125] : Done extracting PackageDesc.xml from VCpackage.tar
[Thu Oct 01 13:11:01 2015] (30380)[Extract.cpp:125] : Done extracting ReleaseNotes.txt from VCpackage.tar
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:324] : FIPSCompliant tag is not found
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:324] : FIPSCompliant tag is not found
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:324] : FIPSCompliant tag is not found
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:361] : Information for module type VC-FC3 is not available in this package
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:558] : xml_get_module_Info VC-FC3 failed for PackageDesc.xml
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:324] : FIPSCompliant tag is not found
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:324] : FIPSCompliant tag is not found
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:361] : Information for module type VC-G2ENETFCOE is not available in this package
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:599] : xml_get_module_Info VC-G2ENETFCOE failed for PackageDesc.xml
[Thu Oct 01 13:11:01 2015] (30380)[VcsuFirmware.cpp:769] : ReleaseNotes.htm saved in current directory
[Thu Oct 01 13:11:01 2015] (30380)[GetModuleUpdateInfo.cpp:1272] : Domain is not in FIPS mode
[Thu Oct 01 13:11:01 2015] (30380)[GetModuleUpdateInfo.cpp:1272] : Domain is not in FIPS mode
[Thu Oct 01 13:11:01 2015] (30380)[VcsuCore.cpp:2378] : Checking state of any incompleted firmware updates.
[Thu Oct 01 13:11:02 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.170
[Thu Oct 01 13:11:03 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.170
[Thu Oct 01 13:11:04 2015] (30380)[VcsuCore.cpp:2471] : No incomplete firmware updates detected.
[Thu Oct 01 13:11:04 2015] (30380)[VcsuCore.cpp:2378] : Checking state of any incompleted firmware updates.
[Thu Oct 01 13:11:05 2015] (30380)[VcsuSsh.cpp:143] : Connection established to 172.29.0.171
[Thu Oct 01 13:11:05 2015] (30380)[VcsuSsh.cpp:163] : Successfully established session to 172.29.0.171
[Thu Oct 01 13:11:05 2015] (30380)[VcsuCore.cpp:2471] : No incomplete firmware updates detected.
[Thu Oct 01 13:11:07 2015] (30380)[VcsuCore.cpp:1866] : Primary VCM Found at : 172.29.0.170
[Thu Oct 01 13:11:07 2015] (30380)[VcmWrap.cpp:1732] : VCM Firmware Version: 4.30
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:827] : Virtual Connect Manager configuation is not up-to-date.
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:828] : Continuing would result in old configuration activated.
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:829] : Please reset your Backup VC-ENET Module and try again.
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:827] : Virtual Connect Manager configuation is not up-to-date.
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:828] : Continuing would result in old configuration activated.
[Thu Oct 01 13:11:09 2015] (30380)[GetModuleUpdateInfo.cpp:829] : Please reset your Backup VC-ENET Module and try again.
[Thu Oct 01 13:11:14 2015] (30380)[OaWrap.cpp:793] : User successfully deleted

_______________________________________________________________________________________________

 

I have attempted to reset the VCM and also reset the second module with no change. Please help!