BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

SFP-FC is showing disabled

SOLVED
Go to solution
Alhakimi
Occasional Contributor

SFP-FC is showing disabled

Port enc0:iobay1>x2 is administratively disabled

Hi , i am having 4 x 10 GB network card in Bladesystem C7000 , in Virtual connect showing Ports 1-2 from first bay and 1-2 second bay as network . 

Porst 3-4 showing SFP-FC in both bays showing as disabled incombatible , how to connect to my storage , which port should i use ? and how can i enable the port to use Fabric too as by default its Netwrok only

Regards

 

Rashed

 

2 REPLIES
frenchy94
Frequent Advisor
Solution

Re: SFP-FC is showing disabled

You need to configure san Fabric first then add port to fabric so port will
to go on/enable state



---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
Alhakimi
Occasional Contributor

Re: SFP-FC is showing disabled

Thanks dear , that helped me but there was wirign Problem , thats why i couldn't configure the Fabric channel

but works after that as u mentioned 

Regards

Rashed