Stacking Links Error

[Rhidian]

Hi I'm currently receiving a stacking link error from my c7000 enclosure the error states that.

Some VC-Enet modules are not properly connected via stacking links.  Please verify stacking cable connections.

Any ideas??

[Bart_Heungens]

Hi,

Connect to the Virtual Connect Manager and check the errors under the stacking links option.

Which modules do you have? How connected? Firmware version?

Kr,

Bart

[Rhidian]

The stacking links page doesn't show an errors I'm running on the latest firmware.

[Bart_Heungens]

Doesn't it state any error messages of missing links?

You have the default links between module 1 and 2, and 3 and 4, I assume you need to connect also modules 1 and 3, and 2 with 4...

I do not have a VC manager at the moment to test things out...

Kr,

Bart

[Rhidian]

The only message I have is a Note stating:

Port X0 connects to the internal link between horizontally-adjacent VC-Enet modules.
Port X7 and X8 connects to the internal link between horizontally-adjacent Flex-10/FlexFabric enabled VC-Enet modules.

[Bart_Heungens]

You will need to connect modules 1 and 3 together, and also modules 2 and 4...

Take a look at page 10 from this PDF:

http://h18000.www1.hp.com/products/quickspecs/12597_div/12597_div.pdf

Kr,

Bart

[Rhidian]

How do I go about adding the links?

[Bart_Heungens · Accepted solution]

Sorry it is page 9...

See the 2 vertical connections between modules 1-3 and 2-4...

These connections can be made with for instance CX4 10Gb cables...

Kr,

Bart

[Rhidian]

 Thanks for your help, thee error has now gone.