HPE Community
BladeSystem - General
1751686 Members
4403 Online
108781 Solutions
New Discussion

Strange not assigned/mapped network interface from VC on Server 2016

 
Viipale
Occasional Contributor

‎05-15-2018 11:41 AM - edited ‎05-15-2018 02:16 PM

‎05-15-2018 11:41 AM - edited ‎05-15-2018 02:16 PM

Strange not assigned/mapped network interface from VC on Server 2016

I did assign/map 9 networks at VC and now I can see 10 network interfaces at Server 2016... Extra network interface has also "strange" MAC not starting with 00-. I can see this extra interface also at ILO with status unknown. Server 2016 does show interface as Network cable unplugged. I cannot remove that interface because it is not mapped on VC. How I can remove extra interface? I Did attach snip.

VC firmware 4.60, G8 blade, HP FlexFabric 10Gb 2-port 554FLB Adapter, drivers should be latest.

EDIT:

I did notice that all other Blades will show also that same interface as Network cable unplugged. 

EDIT2: I did remove 9th interface from VC and now extra interface went away from Server 2016 and also from ILO. Bug does not show up if there is only 8 interfaces... so maybe I do not need to mind about extra interface which does not work... Maybe it will work also if I add enough interfaces :)

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.