BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Strange not assigned/mapped network interface from VC on Server 2016

 
Viipale
Occasional Contributor

Strange not assigned/mapped network interface from VC on Server 2016

I did assign/map 9 networks at VC and now I can see 10 network interfaces at Server 2016... Extra network interface has also "strange" MAC not starting with 00-. I can see this extra interface also at ILO with status unknown. Server 2016 does show interface as Network cable unplugged. I cannot remove that interface because it is not mapped on VC. How I can remove extra interface? I Did attach snip.

VC firmware 4.60, G8 blade, HP FlexFabric 10Gb 2-port 554FLB Adapter, drivers should be latest.

EDIT:

I did notice that all other Blades will show also that same interface as Network cable unplugged. 

EDIT2: I did remove 9th interface from VC and now extra interface went away from Server 2016 and also from ILO. Bug does not show up if there is only 8 interfaces... so maybe I do not need to mind about extra interface which does not work... Maybe it will work also if I add enough interfaces :)