HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Two blade server have same mac address in different chasis on same network

 
easifme
Occasional Visitor

Two blade server have same mac address in different chasis on same network

Hi Expert,

 

We have configured two c7000 Chasis one with 12 server and second with 3 server. When we checked we found that MAC address for server  is same in both chaiss. How can we configure different MAC address in Chasis.

 

Sif

1 REPLY
Bart_Heungens
Honored Contributor

Re: Two blade server have same mac address in different chasis on same network

Hi,

 

Which I/O modules are in the enclosure?

 

I think/assume you have Virtual Connect modules? If so, I assume you have selected the same set of HP pre-defined MAC range of addresses... If not, you have to check each blade for the MAC addresses of the NICs inside the blade...

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !