BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Using an NC364M quad port NIC in BL465G7/C7000

Lansley2000
Advisor

Using an NC364M quad port NIC in BL465G7/C7000

Hello all,

 

I wonder if somebody could help with the below?

 

I have two BL465 G7 blades fitted with the embedded Flex-10 plus a NC364M 4 port 1Gb NIC mez card

 

At the back of the C7000 enc I have two 1/10Gb VC modules.

 

I have the two 1/10Gb VC modules situated in bays 3 and 4 and the NC364M is in Mez slot 1 in the blades

 

(I found that if I had the 1/10Gb VC modules in bays 1 and 2 I would get mez card/port mismatches within the OA)

 

From using the onboard administrator I can only see two ports being displayed (1 on each VC interconnect)

 

I need to get the use of  4 NIC ports somehow, using either the onboard Flex-10 or the 4 port NIC mez card

 

Can anyone please advise what I need to configure/purchase?

 

Thanks

 

Simon   

2 REPLIES
Cederberg
Honored Contributor

Re: Using an NC364M quad port NIC in BL465G7/C7000

Lansley2000
Advisor

Re: Using an NC364M quad port NIC in BL465G7/C7000

Thanks Cederberg, thats confirmed my thoughts

 

Simon