BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

VC FlexFabric uplink port support matrix

 
chuckk281
Trusted Contributor

VC FlexFabric uplink port support matrix

Hari was looking to confirm a customer configuration:

 

********************

 

We have a customer requirement where we are proposing the below Virtual connect FlexFabric configuration.

 

Qty. 6  of 1 GB SFP uplink  for LAN connectivity and Qty.1 of 8 GB FC uplink for SAN connectivity per module .

 

I just wanted to check from Virtual Connect support matrix whether this is officially supported configuration.

 

***************

 

From Chad:

 

***************

 

You would only have 4 ports for 1GB connectivity (X5-X8). If you choose to use X5-X8, you would want to then connect a physical cable from one of the other available ports to the horizontal module.

 

**************

 

Reply from Hari:

 

**************

 

So if I have two pair of VC FlexFabric modules in Bay 1 and Bay2 , is the below Config supported ?

 

X1-> 8 GB FC, X2-X3-X4-> 10 Gb for LAN and X5-X6-X7->1 GB  for LAN, X8 cross connect between modules

 

************

 

From Chad:

 

************

 

Yes, that would be supported

 

******************

 

Comments or questions?