HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

VC Stacking

Pramod M
Regular Advisor

VC Stacking



We have an existing C7000 Enclosure with HP VC Flex-10 Enet modules on bay1 & bay2 and VC 8GB 24 Port FC Modules on Bay3 & Bay4.

Now we have a new C7000 blade enclosure with HP VC Flex-10/10D modules on bay1 & bay2 and VC 8GB 24 Port FC Modules on Bay3 & Bay4.

How can configure VC stacking inbetwwen these VC modules. In the first one (VC Flex-10 Enet modules) there is 10GBASE-CX4 ports are available but in the VC Flex-10/10D modules these 10GBASE-CX4 ports are not available. Can these modules stackked using normal LC-LC FC cables? Is this different type module stacking configuration will work? I have read about Connecting multiple enclosures requires identical FC and FlexFabric module bay configuration in each enclosure. Can anybody help on this ?


Thanks in advance ....



Respected Contributor

Re: VC Stacking

Unfortunately you can't stack Flex-10 and Flex10/10D modules - check this earlier post out: