HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

VC can`t find FC modules

 
SOLVED
Go to solution
Outlaw_UA
Visitor

VC can`t find FC modules

Hello !

 

I have c7000 enc with 2x VC Flex-10 Enet Module and 2x B-series 8/24c SAN Switch.

All worked fine.

After delete old vc-domain i can`t properly create new.  In creation process wizard can`t find FC modules. Wizard find 2 Flex-10, 0 - FC and 2 - Unknown.

What is the reason ?

1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: VC can`t find FC modules

Virtual Connect can't manage B-series FC modules.

So you can manage your Flex-10 modules using VC manager, but you need to configure your B-series directly from the switch module interface.

If you need to manage FC modules within VC, you need the VC FC modules, not the brocades.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!