HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect FC modules without Virtual Connect Ethernet modules.

 
chuckk281
Trusted Contributor

Virtual Connect FC modules without Virtual Connect Ethernet modules.

Edvard needed some Virtual Connect module clarification:

 

*********************

 

Hi,

 

With the new Virtual Connect firmware 3.10 there is no longer a need to have the VC Manager in interconnect bay 1 and interconnect bay 2.

Does this mean that it’s possible to run ordinary switches or pass-through modules in bay 1 and 2 and VC FC modules in bay 3 and 4 .

 

**************************

 

Vincent set Edvard on the right path:

 

********************

 

You still need Virtual Connect Ethernet modules to run VC Manager and manage the VC-FC modules. They could be in bays 5&6 with VC 3.10 indeed, but you still need them.

 

*******************

 

That was what Edvard needed to know. Any other questions or comments?