BladeSystem Virtual Connect
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect Fibre Channel to show logins

Trusted Contributor

Virtual Connect Fibre Channel to show logins

Francisco was looking for the VCM GUI to show Fibre Channel logins:




Is there any way to know from the VC manager to what uplink in a VC-SAN has a server made the login? My customer wants to know if it has to make a login redistribution but he is unable to see where is logged each server.




Reply from Vincent:




You can see it in VCM, Hardware -> Enclosure -> Interconnect Bays, select the VC-FC module you want, look at the Uplink Port column in the Server Ports table. You need VC firmware >= 3.70 to get this column. Screenshot below








Any other help or questions?