HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect Flex-10/10D Module for c-Class and Cisco Nexus 5010

 
_Vins
Occasional Visitor

Virtual Connect Flex-10/10D Module for c-Class and Cisco Nexus 5010

Hi guys

I need your help ...

I' m buying HP c7000 with Virtual Connect Flex-10/10D Module and LOM HP Flex-10 10Gb 2P 530FLB FIO Adptr.

All Blade 460 G8 ... for VMware 5.1. the question is can I connect Virtual connect to cisco nexus only for network (without FCoE ) via SPF+ ? if I install HP FlexFabric 10Gb 2-port 534FLB Adapter with NO FCoE it

alike  work?
thanks all

 

 

 

1 REPLY
Casper42
Trusted Contributor

Re: Virtual Connect Flex-10/10D Module for c-Class and Cisco Nexus 5010

Yes, the 530 and 534 can both be used as only NIC Devices talking to a Flex-10/10D with a Nexus upstream.

Because both the 530 and 534 are both Broadcom devices you should even be able to use the same drivers in VMware.