HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect Flex-10 LAN Module Stacking question

Trusted Contributor

Virtual Connect Flex-10 LAN Module Stacking question

Siegfried had a stacking link question:




Hi all,


We have an c7000 config with 2 VC Flex-10 Modules in bay 1 and 2, additionally we have the 1/10 Gb-F VC IO Module in bay 5 and 6.


Bay 1 and 5, as well as bay 2 and 6 need to be stacked together.


From the quickspecs this is possible with the CX4 connections on each of the VC modules (picture 1).


Question is, if it is also possible to use the port 1 (X1) from the Flex-10 module and connect with the 1 Gb SFP port 4 (or 5) on the 1/10 VC module (picture 2) ?


VC Crosslink.jpg



Vincent replied:




Yes, it’s possible. Not simultaneously (on Flex-10 you can use CX4 or X1, they’re shared) but you sure can make a 1Gb stacking link the way you describe, using a 1Gb SX SFP (453151-B21) on each side.




Any additional info for Siegfried? Have you used the CX link on your systems? Work fine?