BladeSystem - General
1748058 Members
5597 Online
108758 Solutions
New Discussion

Virtual Connect Manager (VCM) 3.15 and some links not displaying any information

 
chuckk281
Trusted Contributor

Virtual Connect Manager (VCM) 3.15 and some links not displaying any information

Manuel had some Virtual Connect GUI issues:

 

*************************

 

Working an issue with VCM not displaying information on most of the links.  This is a c7000 with 1/10GB Enets running fw 3.15.  When he clicks on certain links such as the Ethernet Settings or SAN Fabrics the screen opens up with three bars that read: Loading Flex runtime 100%, Loading HP Look and Feel 100% and Loading VCM UI Components 99%.  That screen soon disappears and he is left with a blank page which never loads or generates any type of message.

CU has physically reseated all VC modules plus the OAs and their sleeve and resetvcm several times but nothing seems to clear up the issue.  Any recommendations on what else to check would be greatly appreciated.

 

***********************

 

Vincent suggested:

 

********************

 

Sounds like a Flash player issue in the browser. Go to http://www.adobe.com/support/flashplayer/, upgrade to the latest, check other Flash-enabled web sites, try another browser, etc.

 

**********************

 

Remember that the VC Manager implemented the use of the Adobe Flash player in recent updates. Other comments or suggestions for Manuel?